Xiao Li,Sun Yan,Qin Yinhe,et al.Application of distal humeral lateral closed wedge osteotomy guide in correcting cubeus varus deformity in children[J].Journal of Clinical Pediatric Surgery,2024,(05):474-478.[doi:10.3760/cma.j.cn101785-202304053-014]
肱骨远端外侧闭合楔形截骨导板在儿童肘内翻畸形矫正中的应用
- Title:
- Application of distal humeral lateral closed wedge osteotomy guide in correcting cubeus varus deformity in children
- Keywords:
- Cubitus Varus; 3D Printing; Osteotomy Guided Plate; Surgical Procedures; Operative; Child
- 摘要:
- 目的 探讨利用3D打印技术设计肱骨远端外侧闭合楔形截骨导板辅助截骨在儿童肘内翻畸形中应用的可行性。 方法 回顾性分析正大邵阳骨伤科医院小儿骨科2020年1月至2022年1月共45例采用3D打印外侧闭合楔形截骨导板辅助截骨的肘内翻畸形患儿临床资料。男35例、女10例,左侧24例、右侧21例。测量45例患儿术前、术后提携角,前倾角,肘关节屈伸活动度。采用Oppenheim 肘关节功能评分标准评定肘关节功能。 结果 45例均获随访,术前健侧提携角为(10.64±1.93)°、患侧提携角为(-17.34±2.36)°,末次随访时健侧提携角为(10.82±2.74)°、患侧提携角为(11.29±1.63)°,手术前后患侧提携角对比差异有统计学意义(P<0.05),末次随访时双侧提携角对比差异无统计学意义(P>0.05);末次随访时双侧肘关节活动度对比差异无统计学意义(P>0.05)。根据Oppenheim 肘关节功能评分标准,优30例、良12例、差3例,优良率为93%(42/45)。 结论 3D打印外侧闭合楔形截骨导板辅助截骨,可使肘内翻矫形变得更简便、更精确、创伤更小,并取得较为理想的临床疗效。
- Abstract:
- Objective To explore the feasibility of utilizing three-dimensional (3D) printing technology for designing a lateral closing wedge osteotomy plate for assisting in osteotomy for cubitus varus deformity in children.Methods Retrospective analysis was conducted for the relevant clinical data of 45 children of cubitus varus deformity treated with the assistance of a 3D printed lateral closing wedge osteotomy plate from January 2020 to January 2022 in the pediatric orthopaedic ward of Chia Tai Shaoyang Orthopedic Hospital.There were 35 boys and 10 girls.The involved side was left (n=24) and right (n=21).Perioperative values of carrying angle,anteversion angle and range of motion of elbow joint were measured.Elbow joint function was assessed by the Oppenheim Elbow Function Score.Results At the last follow-up,carrying angle of affected elbow joint was (11.3±1.6)°.There was no statistically significant difference as compared to unaffected side (P=0.085>0.05).Maximal extension angle of affected limb at the last follow-up ranged from -10° to 15° (average 3.7°) and maximal flexion angle ranged from 125° to 145° (average 134.6°).There was no statistically significant difference as compared to unaffected side (P=0.12>0.05).According to the Oppenheim Elbow Function Score,the excellent/decent rate was 93%.Conclusions For cubitus varus deformity in children,using a 3D printed lateral closing wedge osteotomy plate for assisting in osteotomy may offer a simpler,more accurate and mini-invasive correction,achieving favorable clinical outcomes.
参考文献/References:
[1] 潘少川.实用小儿骨科学[M].第2版.北京:人民卫生出版社,2005:450. Pan SC.Practical Pediatric Orthopedics[M].2nd Edition.Beijing:People’s Medical Publishing House,2005:450.
[2] Bauer AS,Pham B,Lattanza LL.Surgical correction of cubitus varus[J].J Hand Surg Am,2016,41(3):447-452.DOI:10.1016/j.jhsa.2015.12.019.
[3] 杨健,何涛贞,刘少锋,等.外侧闭合楔形截骨术矫正儿童创伤性肘内翻畸形[J].中国修复重建外科杂志,2012,26(6):657-660. Yang J,He TZ,Liu SF,et al.Lateral closing wedge osteotomy for traumatic cubitus varus deformity in children[J].Chinese Journal of Reparative and Reconstructive Surgery,2012,26(6):657-660.
[4] Takagi T,Seki A,Takayama S,et al.Modified step-cut osteotomy for correction of post-traumatic cubitus varus deformity:a report of 19 cases[J].J Pediatr Orthop B,2016,25(5):424-428.DOI:10.1097/BPB.0000000000000331.
[5] Oppenheim WL,Clader TJ,Smith C,et al.Supracondylar humeral osteotomy for traumatic childhood cubitus varus deformity[J].Clin Orthop Relat Res,1984,188:34-39.
[6] Banerjee S,Sabui KK,Mondal J,et al.Corrective dome osteotomy using the paratricipital (triceps-sparing) approach for cubitus varus deformity in children[J].J Pediatr Orthop,2012,32(4):385-393.DOI:10.1097/BPO.0b013e318255e309.
[7] Cho CH,Song KS,Min BW,et al.Long-term results of remodeling of lateral condylar prominence after lateral closed-wedge osteotomy for cubitus varus[J].J Shoulder Elbow Surg,2009,18(3):478-483.DOI:10.1016/j.jse.2009.02.007.
[8] Husban FM,Odat MM,Dwiri MD.Lateral closing wedge supracondylar humeral osteotomy for treatment of post-traumatic cubitus varus[J].J R Med Serv,2010,17(3):33-38.
[9] 潘鹏,梁春平,甄允方.肱骨髁上截骨加克氏针固定或螺钉及钢丝固定对儿童肘内翻畸形的治疗效果分析[J].临床医药文献电子杂志,2016,3(37):7365-7366.DOI:10.3877/j.issn.2095-8242.2016.37.044. Pan P,Liang CP,Zhen YF.Therapeutic effect of supracondylar humeral osteotomy with Garke wire fixation or screw and wire fixation on cubit varus deformity in children[J].Electron J Clin Med Lit,2016,3(37):7365-7366.DOI:10.3877/j.issn.2095-8242.2016.37.044.
[10] Prabhakar YVS,Srinivasan N.Modified French osteotomy of humerus for post traumatic cubitus varus[J].MRIMS J Health Sci,2016,4(3):150-154.DOI:10.4103/2321-7006.302264.
[11] Chung MS,Baek GH.Three-dimensional corrective osteotomy for cubitus varus in adults[J].J Shoulder Elbow Surg,2003,12(5):472-475.DOI:10.1016/s1058-2746(03)00090-9.
[12] Takagi T,Takayama S,Nakamura T,et al.Supracondylar osteotomy of the humerus to correct cubitus varus:do both internal rotation and extension deformities need to be corrected?[J].J Bone Joint Surg Am,2010,92(7):1619-1626.DOI:10.2106/JBJS.I.00796.
[13] Zhang YW,Xiao X,Gao WC,et al.Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity[J].J Orthop Surg Res,2019,14(1):353.DOI:10.1186/s13018-019-1403-7.
[14] 郑朋飞,陈杰,徐鹏,等.个体化数字导航模板辅助儿童肘内翻畸形精准截骨[J].中国骨伤,2017,30(4):377-382.DOI:10.3969/j.issn.1003-0034.2017.04.020. Zheng PF,Chen J,Xu P,et al.Accurate osteotomy assisted by individualized navigation templates for pediatric cubitus varus[J].Chin J Orthopa Trauma,2017,30(4):377-382.DOI:10.3969/j.issn.1003-0034.2017.04.020.
[15] 杨二平,常祖豪,陈华.三维截骨导板在成人肘内翻畸形矫正中的临床应用[J].中国修复重建外科杂志,2020,34(7):831-835.DOI:10.7507/1002-1892.201906117. Yang EP,Chang ZH,Chen H.Application of three-dimensional navigation template in adult cubitus varus osteotomy[J].Chinese Journal of Reparative and Reconstructive Surgery,2020,34(7):831-835.DOI:10.7507/1002-1892.201906117.
[16] 朱明,柴岗,李青峰.3-D打印技术在下颌前突畸形治疗中的应用[J].中国修复重建外科杂志,2014,28(3):296-299.DOI:10.7507/1002-1892.20140067. Zhu M,Chai G,Li QF.Application of three-dimensional printing technique in correction of mandibular prognathism[J].Chinese Journal of Restorative and Reconstructive Surgery,2014,28(3):296-299.DOI:10.7507/1002-1892.20140067.
[17] 周游,徐小山,李川,等.3D打印导板在Bernese髋臼周围截骨术中的应用[J].中华创伤骨科杂志,2016,18(1):17-23.DOI:10.3760/cma.j.issn.1671-7600.2016.01.004. Zhou Y,Xu XS,Li C,et al.Application of 3D reconstruction navigation template in Bernese periacetabular osteotomy[J].Chin J Orthop Trauma,2016,18(1):17-23.DOI:10.3760/cma.j.issn.1671-7600.2016.01.004.
相似文献/References:
[1]张问广,胡月光.肱骨髁上骨折并发肘内翻的临床与应用解剖研究[J].临床小儿外科杂志,2008,7(03):15.
[2]龙海兵,李明.手术治疗儿童严重型肱骨髁上骨折[J].临床小儿外科杂志,2007,6(02):21.
[3]唐进 梅海波 刘昆 伍江雁 叶卫华 胡欣 谭谦 朱光辉 董林 赫荣国. 肱骨远端倒“V”形截骨治疗儿童肘内翻的疗效评价[J].临床小儿外科杂志,2011,10(06):424.
[J].Journal of Clinical Pediatric Surgery,2011,10(05):424.
[4]王彭,杜智军,陆士蛟,等.３Ｄ打印对儿童发育性髋关节脱位手术策略的应用价值探讨[J].临床小儿外科杂志,2018,17(04):252.
Wang Peng,Du Zhijun,Lu Shijiao,et al.The application of 3D printing in individualized surgical plan of developmental dislocation of the hip in children.[J].Journal of Clinical Pediatric Surgery,2018,17(05):252.
[5]蔡文全,姚瑞翔,宿玉玺,等.３Ｄ打印技术在儿童先天性脊柱半椎体手术治疗中的应用研究[J].临床小儿外科杂志,2018,17(04):259.
Cai Wenquan,Yao ruixiang,Qin Jiaqiang,et al.Application of threedimensional printing for congenital hemivertebra.[J].Journal of Clinical Pediatric Surgery,2018,17(05):259.
[6]李浩,张学军,祁新禹等.3D打印技术辅助手术治疗儿童重度脊柱侧凸的应用研究[J].临床小儿外科杂志,2018,17(09):654.
Li Hao,Zhang Xuejun,Qi Xinyu,et al.Application of 3D printing technology in surgical treatment of severe scoliosis in children[J].Journal of Clinical Pediatric Surgery,2018,17(05):654.
[7]刘柱,李海,范清,等. 肱骨髁上外侧楔形截骨联合锁定钢板内固定治疗儿童肘内翻畸形的疗效研究[J].临床小儿外科杂志,2018,17(10):758.
Liu Zhu,Li Hai,Fan Qing,et al.Outcomes of supracondylar lateral closing wedge osteotomy plus locking plate fixation for posttraumatic cubitus varus in children.[J].Journal of Clinical Pediatric Surgery,2018,17(05):758.
[8]杨超,王珊,李长春,等.3D打印技术在儿童腹膜后神经母细胞瘤血管骨骼化手术中的应用价值探讨[J].临床小儿外科杂志,2019,18(05):376.[doi:10.3969/j.issn.1671-6353.2019.05.008]
Yang Chao,Wang Shan,Li Changchun,et al.Application of three-dimensional printing technology in vascular skeletal surgery for children with retroperitoneal neuroblastoma[J].Journal of Clinical Pediatric Surgery,2019,18(05):376.[doi:10.3969/j.issn.1671-6353.2019.05.008]
[9]白云松,张学军,曹隽,等.3D打印模型在儿童先天性脊柱侧凸治疗中的应用研究[J].临床小儿外科杂志,2020,19(02):115.[doi:10.3969/j.issn.1671-6353.2020.02.005]
Bai Yunsong,Zhang Xuejun,Cao Jun,et al.Clinical efficacy of three-dimensional model in the surgical treatment of congenital scoliosis in children[J].Journal of Clinical Pediatric Surgery,2020,19(05):115.[doi:10.3969/j.issn.1671-6353.2020.02.005]
[10]宁金波,姚明木.3D打印技术在小儿后天性肘内翻畸形截骨矫形术中的应用[J].临床小儿外科杂志,2021,20(10):941.[doi:10.12260/lcxewkzz.2021.10.009]
Ning Jinbo,Yao Mingmu.Application of three-dimensional printing technology during corrective osteotomy for cubitus varus deformity in children[J].Journal of Clinical Pediatric Surgery,2021,20(05):941.[doi:10.12260/lcxewkzz.2021.10.009]
备注/Memo
收稿日期:2023-04-20。
通讯作者:丁绍斌,Email:309652552@qq.com